|

GROUND TRAC
In metal detecting, it is very important that the machine is calibrated
for the particular soil conditions that you are hunting. This allows
the detector to discriminate the difference between the soil and a target.
Bounty Hunter metal detectors come with the Ground Trac®. This feature
automatically balances the machine to the soil conditions.
DIGITAL CIRCUITRY
ZILOG Z-86 Computer Circuit which combines with Bounty Hunter's Patented
Technology.
MANUAL GROUND BALANCE
This featuer allows the detectorist to set the balance for the mineralization
of the soil. This allows flexibility between soil types. Great for competitions.
LCD DISPLAY
The LCD target readout will display the probable type of metal being
targeted and what denomination of coins are detected. The denomination
of coins are also symbols for many other types of metal that are in
the same detection range.
|
3 MODE DISCRIMINATION
This is the three modes in which some detectors operation. 1) Motion
all metal mode is when it is necessary to swing the coil. 2) No-Motion
all metal mode is when no movement is required to detect a target.
3) The Motion all metal mode is the same mode as the motion all metal
discriminate mode, but with the discrimination turned all the way down
(off). It allows the user to hunt with three tone audio target ID and
"see" everything, or almost everything.
NO MOTION DISCRIMINATION
No-Motion all metal mode is when no movement of the coil is required
to detect a target.
DEPTH READOUT
The depth indication dial is located at the top right of the LCD panel.
Each number represents inches (2 -10 inches). The depth arrow will lock
on and emit simultaneously with the target identification. Usually when
the depth hits 10 inches, the target identification will emit an arrow
under deep target.
5 YEAR WARRANTY
Bounty Hunter metal detectors are warranted to the original retail
consumer for 5 years from date of retail purchase against defects in
material and workmanship.
|