Fisher Metal Detectors
Fisher Accessories
Fisher Search Coils

Minelab Metal Detectors
Minelab Accessories
Minelab Search Coils

Garrett Metal Detectors
Garrett Security Detectors
Garrett Accessories
Garrett Search Coils

Tesoro Metal Detectors
Tesoro Accessories
Tesoro Search Coils

Bounty Hunter Detectors
Bounty Hunter Accessories

Detector Pro Detectors
Detector Pro Accessories

BIGFOOT LOOP 18" Long by 3 ½"

In the "all metal" mode the Bigfoot detects from the front half of the loop only. This characteristic makes it possible to pinpoint very accurately. White's Eagles and Spectrums have a special setting called "absolute value" which allows for detecting on the full loop in the all metal mode as well.

The Bigfoot attains depths about equivalent to an 8" diameter loop. Its main advantage is that it covers up to 10 times the ground in one sweep and is ideal for searching large areas, such as beaches, ski slopes, fields and parks.

HOT SHOT COILS

This super light weight "pancake coil" weighs only 2 ounces more than the standard .950 coil. It has revolutionary coil geometry which is maximized for high sensitivity and greater depth.

LARGE MAGNUM FORCE COILS

Magnum Force Loops are designed by Jim Karbowski for use by Cache and Relic Hunters. Both the 15" and 25" loops are maximized for high sensitivity for larger, deeper targets and are extremely lightweight for their size. Both loops are designed for use on all White's Pro's, Eagle's, Quantums and Spectrums.

The 15" Magnum Force loop is best suited for finding targets in coffee can size or larger and will achieve depths up to 3 to 5 feet depending on the detector used and the size of the target. This loop is a favorite among Relic Hunters.

The Magnum Force 25" loop is the "Big Daddy" of the deep searching loops and is designed for the serious Treasure Hunter. Relic and Cache Hunters can achieve depths of 6 to 9 feet, again depending upon the detector used and the size of the target. Although the 15" Magnum Force Loop may be used in the discriminate mode, such as when relic hunting, large loops perform best in the "all metal" mode and achieve their best depths when searching for larger targets. The 25" loop should only be used in the "all metal" mode following the instructions enclosed with it. For ease of operation, a Sierra Arm Support System is included with the 25" loop. Available for White's 6.59 khz machines JS-MF25 and now available for White's DFX and MXT JS-MF25/X

HotFoot !HotFoot !
"Double D Technology"

* Covers a 9" swath in one sweep
* Super Light Weight
* Fun to use
* Excellent Depth
* Easy to pinpoint
* works great on the GMT, GM2,Vsat,GM3 GM4B DFX and MXT
* 2" Wide and 9" Long for getting into tight places
* Double D technology for ideal ground cancelling

The XL-1 Target Probe has been developed to satisfy the pinpointing and retrieval needs of XLT and other single frequencey Whites Models such as the Quantum,5900, Pro XL etc.

* Accurate "Bullseye" pinpointing on coin size targets up to 3"+ deep depending on detector used, settings, ground and moisture conditions!

* Light weight, waterproof/submersible 9" X 1" diameter probe mounts on top of upper shaft (which has been very popular among Explorer users). DX-1 probe and cable weigh approx. 6 oz. DX-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5 oz. - approx. 11 oz total! (Optional box mount probe clip attachment available for those wishing to mount probe along side of detector control housing).

* While the probes are waterproof the switch box is water resistant and must not be submersed. ( uses the same connectors as White's.)

* Incorporates all of the same functions as the stock coil including accurate visual and audible target ID along with identical pinpoint functions!

* High quality custom made, durable probe and connector cable used with identical specifications as White's cable for precision performance! (NOTE: Probe now available in either partially coiled or straight cable (less tangles).

* Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)

* Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.

* Conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.

* No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!

* No extra batteries required ,utilizes the detectors power source.